Removing The Ice Maker Storage Bin - KitchenAid KSSS36QDX05 Use And Care Manual

sing Your Refrigerator
Removing the ice maker storage bin
Depending on the model, the ice maker storage bin
holds the following amounts of ice:
KSSS36- 8.5 pounds (3.8 kg)
KSSS42- 13.5 pounds (6.1 kg)
KSSS48 - 17.6 pounds (8.0 kg)
Ice maker
covering
panel down
Remove unused ice periodically to reduce the poten-
tial for off-taste or odor buildup in ice. The storage bin
can be removed for cleaning or to dispense large
amounts of ice at one time.
To remove:
1. Pull the ice maker covering panel out from the
bottom and slide it to the rear.
2. Lift the ice maker signal arm until you feel it click
into the OFF position.
For dispenser models only: While the ice maker
is OFF, no more ice can be produced, but ice can
still be dispensed when the freezer door is closed,
3. Lift the front of the storage bin, then pull it out.
4. Empty the storage bin. Use hot or warm water to
melt ice if necessary. Never use anything sharp to
break up ice in the storage bin. This can damage
the storage bin and the dispenser mechanism.
To replace:
1. Make sure storage bin is pushed in all the way.
2. Push the ice maker signal arm down to the ON
position to restart ice production.
3. Lower the ice maker covering panel.
Ice maker
covering
panel up
13