Cornelius Remcor TJ45-D Operator's Manual page 5

5. Sanitize the inside of hopper and agitator with a solution of 1/2 ounce household bleach in 1 gallon of
water. (200 PPM)
6. Remove Ice chute cover as follows:
A. Flex sides outward to disengage lower pins.
B. Lift Ice Chute cover to disengage upper pins.
C. Lower Ice Chute cover down out of unit. Note: It may be helpful to twist cover slightly.
7. Clean the inside of the ice chute and ice chute cover with a mild detergent solution and rinse thoroughly to
remove all traces of detergent.
8. Reverse steps above to reassemble ice chute.
9. Sanitize as descried in step 5.
3
90665