Billion MWEB W40 Quick Start Manual page 13

Warning
13. After all the information has been saved, you will be notified that the wizard is now complete
and that the router will be restarted (see figure below). The restart will take approximately 1 to 2
minutes, after which you will be able to browse the internet. Click on the "Ok" button to complete
the wizard.
MW/W40 V4.0A-090115
 We recommend that you change the WPA shared-key for the
wireless network to a user-defined value. This key must be no
shorter than eight (8) alphanumeric characters.
 We recommended that the Wireless Access point name be
changed to a new name. This is the name that will be
displayed for your wireless network when you scan for
networks in range.
 You should change the admin password on your router to
prevent unauthorised access.
 Please memorize or keep this password in a safe place, as
you'll be prompted for it when using the management utility.
 You have now completed the basic setup for the W40 that allows
you to connect to the Internet only. The following steps in the
Quick Start Guide focus on the management utility and how it
can be used to set up and manage other features such as
wireless and the diagnostic tool.
 The utility also enables you to manage your ISP and
administration accounts.
 In addition, the utility can be used to diagnose your current W40
configuration and assist in troubleshooting when problems occur.
This diagnostic test will also be the starting point in the fault-
finding process when you log a fault report with MWEB Technical
Support.
 The following steps are optional. If you do not wish to set up
advanced features, do not proceed to the following steps.
MWEB ADSL Wi-Fi Router
Page 13