Billion MWEB W40 Quick Start Manual page 12

11. This step (see figure below) will test your ISP account as you have entered it in the
previous step. It will test your account authentication (PPP Connection) as well as a live Internet
connection. Should any of the tests fail, tips will be displayed that will assist you in resolving the
problem.
On successful completion of both tests, a confirmation message will be displayed, after which the wizard
will automatically proceed to the last step: Management Security.
12. In the Management Security step, you will be given the opportunity to change your router's
administrative password, the name for the wireless network (SSID) and the security key for the
wireless connection. MWEB highly recommends that customers alter all three (3) of these fields, as
it is a security risk to leave them as their default values.
Please enter and confirm a new password and click on the "Save new password" button to update
the router with the new security account.
You can skip this step by clicking on the "Skip" button, although this is not recommended. If you
click Skip, a window will pop up informing you that it is not recommended to leave these as their
default values. If you would like to change the security settings, click on the "Yes" button. If you
wish to proceed without changing the values, click on the "No" button. This will then save all the
details to the router and restart the router.
MW/W40 V4.0A-090115
Quick Start Guide
Page 12