1. Manuals
  2. Brands
  3. Billion Manuals
  4. Network Router
  5. myGuard 7202
  6. User manual

Billion myGuard 7202 User Manual

Billion wireless-g security adsl2+ router user's manual
Hide thumbs Also See for myGuard 7202:
Table of Contents

Advertisement

Quick Links

Download this manual
myGuard 7202 / 7202G
(Wireless-G) Security ADSL2+ Router
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the myGuard 7202 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Billion myGuard 7202

Summary of Contents for Billion myGuard 7202

  • Page 1 7202 / 7202G (Wireless-G) Security ADSL2+ Router User’s Manual...

  • Page 2: Table Of Contents

    Chapter 1 ... 1 1.1 Introducing the myGuard 7202(G)... 1 1.2 Features... 3 1.3 Applications of the myGuard 7202(G)... 6 Chapter 2 ... 7 2.1 Important Notes ... 7 2.2 Package Contents... 7 2.3 The Front LEDs... 8 2.4 The Rear Ports ... 9 2.5 Cabling ...

  • Page 3: Chapter 1

    Introduction 1.1 Introducing the myGuard 7202(G) Thank you for purchasing the myGuard 7202(G) ADSL Router by Billion. Your new router is an all-in-one unit that combines an ADSL modem, ADSL router and Ethernet network switch to provide everything you need to get the machines on your network connected to the Internet over an ADSL broadband connection.
  • Page 4 You can set an ISP (Internet Service Provider) provided IP address on the myGuard 7202(G) and then you can reroute specific services to individual computers on your local network. For instance, a...

  • Page 5: Features

    (RFC1577) to establish a connection with an ISP. The router also supports VC-based and LLC-based multiplexing. Quick Installation Wizard A web-based GUI and quick installation wizard help you easily install the myGuard 7202(G). Enter your ISP’s information and begin browsing the Internet immediately. Universal Plug and Play (UPnP) and UPnP NAT Traversal...
  • Page 6 DDNS service such as http://www.dyndns.org/. PPP over Ethernet (PPPoE) The myGuard 7202(G) provides an embedded PPPoE client function to establish a connection. You get greater access speed without changing the operation concept, while sharing the same ISP account and paying for one access account. No PPPoE client software is required for the local computer.
  • Page 7 Virtual Server: You can specify which services are visible to outside users. The myGuard router detects an incoming service request and forwards it to the specific local computer for handling. For example, you can assign a PC in a LAN to act as a Web server inside and expose it to the outside network.

  • Page 8: Applications Of The Myguard 7202(G)

    1.3 Applications of the myGuard 7202(G)

  • Page 9: Important Notes

    Do not open or repair the case yourself. If the myGuard Warning 7202(G) is too hot, turn off the power immediately and have it repaired at a qualified service center. Avoid using this product and all accessories outdoors.

  • Page 10: The Front Leds

    2.3 The Front LEDs myGuard 7202 myGuard 7202G PPP : ADSL: LAN Port 1-4: WLAN (7202G only) SYS : PWR : Description Steady glow when there is a PPPoA / PPPoE connection. Lights when successfully connected to an ADSL DSLAM (linesync).

  • Page 11: The Rear Ports

    2.4The Rear Ports myGuard 7202 myGuard 7202G Port RESET Description Connect the supplied power adapter to this jack. After the myGuard router is powered on, press this recessed button using the end of paper clip or other small pointed object to reset the router or to restore it to factory default settings.
  • Page 12 password will be reset to admin, and the modem will be accessible via its default IP address at http://192.168.1.254/ Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when connecting to a PC or an office/home network of 10Mbps or 100Mbps.

  • Page 13: Cabling

    2.5 Cabling One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables.

  • Page 14: Installation

    You can configure the myGuard 7202(G) router through the convenient and user-friendly interface of a web browser. Most popular operating systems such as Linux and Windows 98/NT/2000/XP/Me include a web browser as a standard application. 3.1 Before Configuration PCs must have a properly installed Ethernet interface and connect to the router directly or through an external repeater hub.

  • Page 15: Configuring A Pc In Windows Xp

    Configuring a PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties.

  • Page 16: Configuring A Pc In Windows 2000

    Configuring a PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4.

  • Page 17: Configuring Pc In Windows 98/Me

    Configuring PC in Windows 98/Me 1.Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2.Select TCP/IP ->NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3.Select the Obtain an IP address automatically radio button.
  • Page 18 Configuring PC in Windows NT4.0 1.Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2.Select TCP/IP Protocol and click Properties. 3.Select the Obtain an IP address from a DHCP server radio button and click OK.

  • Page 19: Activating Trend Micro Security Services

    3.2 Activating Trend Micro Security Services Activate Trend Micro Security Services and receive enhanced protection for your PCs. Available Services Security Scan Vulnerability reports Virus Scan Personal Firewall Spyware Protection Parental Controls To activate Trend Micro Security Services, follow the steps below: Step 1: Register your Trend Micro account Step 2: Validate the Registration Email.

  • Page 20: Factory Default Settings

    3.3 Factory Default Settings Before configuring the myGuard 7202(G) router, you need to know the following default settings. Web Interface: Username: admin Password: admin LAN Device IP Settings: IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 ISP setting in WAN site: PPPoE DHCP Server: DHCP server is enabled.

  • Page 21: Lan And Wan Port Addresses

    Open your web browser, enter the IP address of your router, which by default is 192.168.1.254, and click “Go”, a user name and password window prompt appears. The default username and password are “admin” and “admin”. Congratulations! You have successfully logged on to your myGuard 7202(G) ADSL Router! LAN Port 192.168.1.254...

  • Page 22: Chapter 4

    Once you have logged on to your myGuard 7202(G) ADSL Router via your web browser, you can begin to set it up according to your requirements. On the configuration homepage, the left navigation pane links you directly to the setup pages, which include:...

  • Page 23: Status

    4.1 Status...
  • Page 24 Device Information Host Name: Provide a name for the router for identification purposes. Host Name lets you change the router name. System Up-Time: Records system up-time. Current time: Set the current time. See the Time Zone section for more information.
  • Page 25 Hardware Version: Chipset version Software Version: Firmware version LAN MAC Address: The LAN MAC address WAN MAC Address: The WAN MAC address Home URL: Connects to the Home Website. IP Address: LAN port IP address. Sub Net Mask: LAN port IP subnet mask. DHCP Server: LAN port DHCP role - Server, Relay or None.

  • Page 26: Arp Table

    4.1.1 ARP Table The router’s ARP (Address Resolution Protocol) Table shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is a quick way to determine the MAC address of the network interface of your PCs to use with the router’s Firewall – MAC Address Filter function.

  • Page 27: Wireless Association

    4.1.2 Wireless Association IP Address: It is IP Address of wireless client that join this network. MAC: The MAC address of wireless client.

  • Page 28: Routing Table

    4.1.3 Routing Table Routing Table: #: Item number Destination: IP address of the destination network. Netmask: The destination netmask address. Gateway/Interface: IP address of the gateway or existing interface that this route uses. Cost: The cost of transmission for routing purposes. The number need not be precise, but it must be between 0 and 65535.

  • Page 29: Dhcp Table

    4.1.4 DHCP Table Leased: DHCP assigned IP addresses information. IP Address: IP addresses of devices on your LAN (Local Area Network). MAC Address: The MAC Address that you want to assign the fixed IP address Client Host Name: Expired IP addresses information Register Time: Register time information...

  • Page 30: System Log

    4.1.5 System Log Display system logs accumulated up to the present time. You can trace historical information with this function.

  • Page 31: Security Log

    4.1.6 Security Log This screen displays security log information. If a hacker attacks your server, he is isolated by the firewall function and the router records related information. This helps you know where the hacker comes from.

  • Page 32: Quick Start

    4.2 Quick Start For detailed instructions on configuring WAN settings, see the WAN section of this manual. The information you need for the Quick Start wizard to get you online are your login (often in the form of username@ispname), your password, and the encapsulation type. Your ISP can supply all the details you need.
  • Page 33 Connection Encapsulation: Select the encapsulation type your ISP uses or choose “Auto Scan”. Click Start to begin scanning for encapsulation types offered by your ISP. If the scan is successful, you are presented with a list of supported options. VCI: Enter the VCI assigned to you. This field may already be configured. VPI: Enter the VPI assigned to you.
  • Page 34 Optional Setting IP Address: Type your ISP assigned IP address in the IP Address text box. Subnet Mask: Enter a subnet mask in dotted decimal notation. Default Gateway: You must specify a gateway IP address (supplied by your ISP) Obtain DNS automatically: Select this check box to use DNS. Primary DNS: Enter the IP addresses of the DNS servers.

  • Page 35: Configuration

    4.3 Configuration Click this item to access the following sub-items that configure the ADSL router: LAN, WAN, System, Firewall, QoS, Virtual Server and Advanced. These functions are described in the following sections.

  • Page 36: Lan (Local Area Network)

    4.3.1 LAN (Local Area Network) 4.3.1 LAN (Local Area Network) A Local Area Network (LAN) is a shared communication system to which many computers A Local Area Network (LAN) is a shared communication system to which many computers are attached and is limited to the immediate area, usually the same building or floor of a are attached and is limited to the immediate area, usually the same building or floor of a building.
  • Page 37 4.3.1.2 Wireless Parameters Mode: 802.11b + g (Mixed mode), 802.11b and 802.11g. The factory default is 802.11b + ESSID: Enter the unique ID given to the Access Point (AP), which is already built-in to the router’s wireless interface. To connect to this device, your wireless clients must have the same ESSID as the device.

  • Page 38: Wireless Security

    WDS Service: The default setting is Disable. Check Enable radio button to activate this function. Peer WDS MAC Address: It is the associated AP’s MAC Address. It is important that your peer’s AP must include your MAC address in order to acknowledge and communicate with each other.

  • Page 39: Dhcp Server

    WEP Encryption: To prevent unauthorized wireless stations from accessing data transmitted over the network, the router offers highly secure data encryption, known as WEP. If you require high security for transmissions, there are two alternatives to select from: WEP 64 and WEP 128. WEP 128 will offer increased security over WEP 64. Passphrase: This is used to generate WEP keys automatically based upon the input string and a pre-defined algorithm in WEP64 or WEP128.
  • Page 40 To disable the router’s DHCP Server, check Disabled and click Next then click Apply. When the DHCP Server is disabled you need to manually assign a fixed IP address to each PC on your network, and set the default gateway for each PC to the IP address of the router (the default is 192.168.1.254).
  • Page 41 If you check DHCP Relay Agent and click Next then you must enter the IP address of the DHCP server which assigns an IP address back to the DHCP client in the LAN. Use this function only if advised to do so by your network administrator or ISP. Click Apply to enable this function.

  • Page 42: Wan (Wide Area Network)

    4.3.2 WAN (Wide Area Network) A WAN (Wide Area Network) is an outside connection to another network or the Internet. There are three items within the WAN section: ISP, DNS and ADSL. 4.3.2.1 ISP The factory default is PPPoE. If your ISP uses this access protocol, click Edit to input other parameters as below.
  • Page 43 NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a single IP account, sharing the single IP address. If users on your LAN have public IP addresses and can access the Internet directly, the NAT function can be disabled.
  • Page 44 NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a single IP account, sharing a single IP address. If users on your LAN have public IP addresses and can access the Internet directly, the NAT function can be disabled. Username: Enter the username provided by your ISP.
  • Page 45 Description: A user-definable name for this connection. VPI/VCI: Enter the information provided by your ISP. NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a single ISP account, sharing a single IP address. If users on your LAN have public IP addresses and can access the Internet directly, the NAT function can be disabled.
  • Page 46 and to automatically re-establish the PPPoE session when disconnected by the ISP. Connect to Demand: If you want to establish a PPPoE session only when there is a packet requesting access to the Internet (i.e. when a program on your computer attempts to access the Internet).
  • Page 47 4.3.2.2 DNS A Domain Name System (DNS) contains a mapping table for domain name and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www.billion.com and an IP address. An IP address is a 32-bit number in the form of xxx.xxx.xxx.xxx, for example 192.168.1.254.
  • Page 48 4.3.2.3 ADSL ADSL Mode: There are four modes “Open Annex Type and Follow DSLAM’s Setting”, ”Annex A Only”, ”Annex L Only” and ”Annex M Only” that user can select for this connection. Modulator: There are four modes “AUTO”,”ADSL multimode”,”ADSL2”and”ADSL2+” that user can select for this connection. DSP Firmware Version: DSP code version DMT Status: DMT Status Operational Mode: To show the state when user select “AUTO”...

  • Page 49: System

    4.3.3 System There are six items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management. 4.3.3.1 Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network Time Protocol (SNTP) to get the current time from an SNTP server outside your network.
  • Page 50 4.3.3.2 Remote Access To temporarily permit remote administration of the router (i.e. from outside your LAN), select a time period the router permits remote access for and click Enable. You may change other configuration options for the web administration interface using Device Management options in the Advanced section of the GUI.

  • Page 51: Restart Router

    4.3.3.4 Backup / Restore These functions allow you to save and backup your router’s current settings to a file on your PC, or to restore a previously saved backup. This is useful if you wish to experiment with different settings, knowing that you have a backup handy in the case of any mistakes. It is advisable to backup your router’s settings before making any significant changes to your router’s configuration.

  • Page 52: User Management

    If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to factory default settings. You may also reset your router to factory settings by pressing in the small Reset pinhole button on the back of your router for 10-12 seconds while the router is turned on.
  • Page 53 You can change the user’s password, whether their account is active and Valid, as well as add a comment to each user account. These options are the same when creating a user account, with the exception that once created you cannot change the username. You cannot delete the default admin account;...

  • Page 54: Firewall

    4.3.4 Firewall 4.3.4 Firewall Firewall and Access Control Firewall and Access Control Your router includes a full SPI (Stateful Packet Inspection) firewall for controlling Internet Your router includes a full SPI (Stateful Packet Inspection) firewall for controlling Internet access from your LAN, as well as helping to prevent attacks from hackers. In addition to this, access from your LAN, as well as helping to prevent attacks from hackers.
  • Page 55 prevent unauthorized computers or applications accessing your local network from the Internet. Intrusion Detection: Enable Intrusion Detection to detect, prevent, and log malicious attacks. MAC Filter rules: Prevents unauthorized computers accessing the Internet. URL Filter: Blocks PCs on your local network from unwanted websites. A detailed explanation of each of the following five items appears in the Firewall section below: Packet Filter, MAC Address Filter, Intrusion detection, Block WAN Request and URL Filter.

  • Page 56: Packet Filter

    4.3.4.1 Packet Filter Packet filtering enables you to configure your router to block specified internal/external users (IP address) from Internet access, or you can disable specific service requests (Port number) to /from Internet. This configuration program allows you to set up to 6 different filter rules for different users based on their IP addresses or their network Port number.
  • Page 57 Application: User can choose that they want. Outgoing Incoming: Determine whether the rule is for outgoing packets or for incoming packets. Active: Choose “Yes” to enable the rule, or choose “No” to disable the rule. Packet Type: Specify the packet type (TCP, UDP, ICMP or any) that the rule applies to. Select TCP if you wish to search for the connection-based application service on the remote server using the port number.

  • Page 58: Mac Address Filter

    Schedule time: User can setup the time to use the packet filter. If the DHCP server option is enabled, you must be very careful in assigning IP addresses of a filtered private IP range to avoid conflicts because you do not know which PC in the LAN is assigned which IP address.
  • Page 59 Active: Select Yes from the drop down list box to enable MAC address filtering. Action When Matched: Select “Drop” or “Forward”. Log: Choose “Yes” if you wish to generate logs when the filer rule is applied to a packet. MAC Address: Enter the MAC addresses you wish to manage. Candidates:...

  • Page 60: Intrusion Detection

    4.3.4.3 Intrusion Detection Check “Enable” if you wish to detect intruders accessing your computer without permission. The myGuard router automatically detects and blocks a DoS (Denial of Service) attack if a user enables this function. This kind of attack is not to access confidential data on the network;...

  • Page 61: Block Wan Request

    Alert Mail Time: Set the time for receiving Alert mail. Your E-Mail: Set your email address. Recipient’s E-mail: Set the Recipient’s email address to which the E-<mail notification is sent. SMTP server: Set the SMTP (mail) server address. 4.3.4.4 Block WAN Request Check “Enable”...
  • Page 62 Active: Select Yes from the drop down list box to enable or disable the URL Filter feature. Always Block: Select to always check URL filter rules (i.e. at all hours of the day). Block from: Specify the time period to check URL filter rules (e.g. during work hours). Keywords Filtering: Allows blocking by specific keywords within a particular URL rather than having to specify a complete URL (e.g.
  • Page 63 (Forbidden). The checking procedure is: 1. Check the domain in the URL to determine if it is in the trusted list. If yes, the connection attempt is sent to the remote web server. 2. If not, it is checked with the forbidden list. If present, the connection attempt is dropped. 3.

  • Page 64: Qos (Quality Of Service)

    4.3.5 QoS (Quality of Service) Quality of Service Introduction If you’ve ever found your ‘net’ speed has slowed to a crawl because another family member is using a P2P file sharing program, you’ll understand why the Quality of Service features in Billion’s routers is such a breakthrough for home users and office users.
  • Page 65 Application: A name that identifies an existing policy. Time Schedule: Scheduling your QOS policy to be applied. Direction: The traffic flow direction to be controlled by the QOS policy. There are two settings to be provided in the Router: LAN to WAN: You want to control the traffic flow from the local network to the outside world.
  • Page 66 configuration. If you want to make the change persistent in flash, choose When you press your browser. You can use it to define a QOS policy. Controlled Traffic Flow: Specify the traffic flow you want to control. For GRE protocol, there is no need to specify the IP addresses or Application ports in this page.
  • Page 67 GRE: For PPTP VPN Connections. Assigned Data rate: Assign the data ratio for this policy to be controlled. For examples, we want to only allow 20% of the total data transfer rate for the LAN-to-WAN direction to be used for FTP server. Then we can specify here with data ratio = 20. If you have ADSL LINE with 256K/bps.rate, the estimated data rate, in kbps, for this rule is 20%*256*0.9 = 46kbps.
  • Page 68 Gold service (L) Gold service (M) Gold service (H) Silver service (L) Silver service (M) Silver service (H) Bronze service (L) Bronze service (M) Bronze service (H) Local Machine IPs: The IP address values for Local LAN machines you want to control. (For IP packets from LAN to WAN, it is the source IP address.

  • Page 69: Connection Diagram

    QOS example for your Network Connection Diagram VoIP HTTP web browsing users FTP Server ADSL Subscription Rate Upstream: 256 kbps Downstream: 2048 Mbps Example QOS Plan Application IP or Ports VoIP User 192.168.0.1 FTP Sever 192.168.0.100 Incoming and HTTP web browsing users Control Flow...
  • Page 70 Example QOS Setup VoIP application Voice is latency-sensitive application. Most VoIP devices are use SIP protocol and the port number will be assigned by SIP module automatically. Better to use fixed IP address for catching VoIP packets as high priority.
  • Page 71 Above settings will help to improve quality of your VoIP service when traffic is full loading.
  • Page 72 FTP Server Application Some of companies will setup FTP server for customer downloading or home user sharing their files by using FTP. LAN to WAN direction:...
  • Page 73 WAN to LAN direction: With above settings that help to limit utilization of upstream of FTP. Time schedule also help you to only limit utilization at day time.
  • Page 74 HTTP Web Browsing You can control the internet web browsing by specify the HTTP 80 (8080 for some proxy server). LAN to WAN direction:...
  • Page 75 WAN to LAN direction:...

  • Page 76: Virtual Server

    4.3.6 Virtual Server In TCP/IP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be delivered to. Some ports have numbers that are pre-assigned to them by the IANA (the Internet Assigned Numbers Authority), and these are referred to as “well-known ports”.
  • Page 77 Well-known and Registered Ports Port Number Protocol TCP & UDP TCP & UDP TCP & UDP 1503 1720 4000 7070 Item: Item number Type: Select TCP if you wish to search for connection-based application services on the remote server using the port number. Port Start &...
  • Page 78 Delete: Check the Rule No. you wish to delete, then click “Delete”. Item: Item number Service select: Select the service you wish to configure Protocol: Automatic when you choose Service select Start Port & End Port: Enter the public port number & range you wish to configure. IP Address: Enter the IP address of a specific internal server to which requests from the specified port is forwarded.
  • Page 79 In addition to specifying the port number used, you also need to specify the protocol used. The protocol is determined by the particular application. Most applications use TCP or UDP, however you can specify other protocols using the drop-down Protocol menu. Setting the protocol to “all”...

  • Page 80: Advanced

    4.3.7 Advanced Configuration options within the Advanced section are for users who wish to take advantage of the more advanced features of the myGuard router. Users who do not understand the features should not attempt to reconfigure their router, unless advised to do so by support staff.

  • Page 81: Vlan Control

    of the router, which is assigned to you by your ISP. You first need to register and establish an account with the Dynamic DNS provider using their website, for example http://www.dyndns.org/ There are more than 5 DDNS services supported. Disable: Check to disable the Dynamic DNS function. Enable: Check to enable the Dynamic DNS function.

  • Page 82: Device Management

    4.3.7.4 Device Management The Device Management advanced configuration settings allow you to control your router’s security options and device monitoring features.
  • Page 83 Trend Micro All Trend Micro (TMSS) functions: Choose “Enable” or “Disable” TMSS functions that user want. Embedded Web Server: HTTP Port: The port number of the router’s embedded web server (for web-based configuration uses. The default value is the standard HTTP port, 80. You may specify an alternative if, for example, you are running a web server on a PC within your LAN.
  • Page 84 the data. Write Community: Specify a name to be identified as the Write Community, and an IP address. This community string is checked against the string entered in the configuration file. Once a string name is matched, users from this IP address are able to view and modify data. Trap Community: Specify a name and an IP address.
  • Page 85 From RFC1650 (EtherLike-MIB): dot3Stats From RFC 1493 (Bridge MIB): dot1dBase group dot1dTp group dot1dStp group (if configured as spanning tree) From RFC 1471 (PPP/LCP MIB): pppLink group pppLqr group From RFC 1472 (PPP/Security MIB): PPP Security Group) From RFC 1473 (PPP/IP MIB): PPP IP Group From RFC 1474 (PPP/Bridge MIB): PPP Bridge Group...

  • Page 86: Installing Upnp In Windows Example

    Universal Plug and Play (UPnP): UPnP offers peer-to-peer network connectivity for PCs and other network devices, along with control and data transfer between devices. UPnP offers many advantages for users running NAT routers through UPnP NAT Traversal, and on supported systems makes tasks such as port forwarding much easier by letting the application control the required settings, removing the need for the user to control advanced configuration of their device.
  • Page 87 Step 4: Click OK to go back to the Add/Remove Programs Properties window. Click Next. Step 5: Restart the computer when prompted. Follow the steps below to install the UPnP in Windows XP. Step 1: Click Start and Control Panel. Step 2: Double-click Network Connections.
  • Page 88 Step 5: In the Networking Services window, select the Universal Plug and Play check box. Step 6: Click OK to go back to the Windows Optional Networking Component Wizard window and click Next. Auto-discover Your UPnP-enabled Network Device Step 1: Click start and Control Panel. Double-click Network Connections. An icon displays under Internet Gateway.
  • Page 89 Step 3: In the Internet Connection Properties window, click Settings to see the port mappings that were automatically created. Step 4: You may edit or delete the port mappings or click Add to manually add port mappings. Step 5: Select Show icon in notification area when connected option and click OK. An icon displays in the system tray...
  • Page 90 Step 3: Select My Network Places under Other Places. Step 4: An icon describing each UPnP-enabled device shows under Local Network. Step 5: Right-click on the icon of your myGuard 7202(G) and select Invoke. The web configuration login screen displays.
  • Page 91 4.3.7.5 IGMP IGMP, known as Internet Group Management Protocol, is used to management hosts from multicast group. IGMP Forwarding: Accepting multicast packet. Default is set to Enable. IGMP Snooping: Allowing switched Ethernet to check and make correct forwarding decisions. Default is set to Enable...

  • Page 92: Trend Micro

    4.4 Trend Micro There are two items in the Trend Micro section: Security Settings and Parental Controls.

  • Page 93: Security Settings

    4.4.1 Security Settings 4.4.1.1 Configuration The period value allows checking the latest Scan Engine and Virus Patterns of PC-cillin. You can customize the display interval value (1 day, 3 days, 1 week, 2 weeks, and 1 month) to invoke TMSS Security Services during Internet browsing. 4.4.1.2 Status The router checks the latest components available for PC-cillin automatically and provides detailed client Anti-Virus Protection Status which is located on your entire network.

  • Page 94: Parental Controls

    4.4.2 Parental Controls 4.4.2.1 General Settings Parental Controls intercept requests to view Web sites from a user’s Internet browser and based on specified restricted categories, determines whether to allow or block the requested Web site content. Parental Controls are included when you install the evaluation version of Trend Micro Internet Security.
  • Page 95 Violence/Hate/Racism • Abortion • Illegal Drugs • Exception List Select Enable to exclude IP addresses of any users on your LAN from Parental Controls.
  • Page 96 Statistics In addition to blocking Web sites, Parental Controls provides summary information that lets you know how many times users on your network accessed these website categories.

  • Page 97: Getting Started With Trend Micro Security Services

    4.4.3 Getting Started with Trend Micro Security Services To activate your Trend Micro Security Service, you must have Internet Explorer 5.5 or above installed. After finishing WAN connection settings, the following window appears when you open Internet Explorer to browse the Internet for the first time using the myGuard router. Click Continue >>...
  • Page 98 The service asks to download the Trend Micro Security Services ActiveX control.
  • Page 99 Depending on security settings, you may be asked to accept this tool. Click Yes to continue. By default, Internet Explorer permits downloading the ActiveX control, however, if you experience issues downloading it modify your Internet Explorer Security Settings to the following (refer to the Internet Explorer online help for instructions): Download signed ActiveX controls Script ActiveX control marked safe for scripting...
  • Page 100 The Trend Micro Security Services dashboard appears as part of your 60-day evaluation of the security service. Click Scan Now! and activate the Trend Micro Security Services. By clicking Scan Now! Your computer is automatically scanned for exposure to online threats.
  • Page 101 Downloading… Scanning…...
  • Page 102 Vulnerability report for computer A detailed vulnerability report is generated. Please click Step 2 to see detailed information for the entire Network, as in the following figure.
  • Page 103 If you do not wish to perform a security scan now, the Trend Micro Security Services dashboard can be opened any time as follows. • Click the Trend Micro icon button on your Internet Explorer Web browser toolbar. • Click the Security Services link in your Windows Start Menu. Click Activate My Services to activate Trend Micro Security Services for unlimited use.
  • Page 104 To activate Trend Micro Security Services, perform the following: Step 1: Register your Trend Micro account Step 2: Validate the Registration Email Step 3: Install Trend Micro Internet Security (named TIS 11.35 Package). *Important: you may download it through the Internet or find it in the CD folder named Trend Micro Internet Security Software.
  • Page 105 Step 1: Registering your Trend Micro account In the appropriate fields on the Register Web page, type your name and email • address and other required information. Registration involves sending an email to the typed address to verify the email address is correct. Returning users can use their existing Customer Care Center IDs and click •...
  • Page 106 Trend Micro sends a verification email to this address that you must reply to before your services are activated. Click << Back to make any modifications. Click Submit. A validation email is sent to the email address you entered.
  • Page 107 Step 2: Validating the Registration Email After submitting your Trend Micro account registration information, Trend Micro sends a validation email to confirm that the email address is correct. To validate your email address: 1. Open your email client (for example, Microsoft Outlook, Outlook Express) and click the validation link in the Trend Micro email to verify your email address.
  • Page 108 Step 3: Installing Trend Micro Internet Security After validating the email to confirm your Trend Micro account, the final step involves downloading and installing Trend Micro Internet Security. To download and install Trend Micro Internet Security: 1. Click Start Download. Another Web page appears. 2.
  • Page 109 Viewing Service Summary To view Service Summary: 1. Open the Trend Micro Security Services dashboard. 2. On the dashboard main menu, click Service Summary. View Service Summary quickly displays the following: Trend Micro Customer Account information • The number of days remaining for trial version software •...
  • Page 110 Parental Controls are included when you install the evaluation version of Trend Micro Internet Security. This evaluation can only be switched on by the myGuard 7202(G) and functions for 60 days after activation. You can renew this service by purchasing continued use for a year.
  • Page 111 In addition to blocking Web sites, Parental Controls provide summary information that lets you know how many times users on your network accessed filtered categories. To view statistics for Parental Controls: 1. Open the myGuard 7202(G) Web GUI. Open the Trend Micro Security Services dashboard, click Parental Controls.

  • Page 113: Save Configuration To Flash

    4.5 Save Configuration to Flash After changing the router’s configuration settings, you must save all of the configuration parameters to FLASH to avoid losing them after turning off or resetting your router. Click Save to write your new configuration to FLASH.

  • Page 114: Restart

    4.6 Restart Click Restart with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to factory default settings.

  • Page 115: Troubleshooting

    If your ADSL Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service provider or Billion support. This can save you time and effort but if symptoms persist, consult your service provider. If you are a registered TMSS user, please provide your Trend Micro User ID and MAC ID to Billion Support Center when returning your unit.

  • Page 116: Problems With The Wan Interface

    Problems with the WAN Interface Problem Initialization of the PVC connection (“linesync”) failed. Frequent loss of ADSL linesync (disconnections). Problems with the LAN Interface Problem Can’t ping any PCs on the LAN. Corrective Action Ensure that the telephone cable is connected properly from the ADSL port to the wall jack.

  • Page 117: Appendix

    Appendix Support and Contact Information If you cannot resolve the problem after reading the Troubleshooting chapter, please contact the dealer where you purchased this product. Contact Billion AUSTRALIA http://www.billion.com.au ©2005 Billion Electric Co., Ltd. PC Range P/L. All Rights Reserved. WORLDWIDE http://www.billion.com...

This manual is also suitable for:

Myguard 7202g

Table of Contents

Save PDF