Connecting System Hardware Together When Using An Interface Box With An Auxiliary Monitor - Allen-Bradley 2755-LS7-SB User Manual

4–8 Installing Your Hardware
Connecting System
Hardware Together When
Using an Interface Box
with an Auxiliary Monitor
Publication 2755-6.9
Follow the steps starting below to connect your system hardware
together when using an auxiliary monitor. You can only use Series B
or higher of the reader when using an auxiliary monitor. Refer to
appendix B and page 6–11 for cable pinouts.
1. Plug the reader into the interface box.
To Scanner Port
Reader
2. Plug any sinking package detect or relay options into the trigger
connector port on the interface box. For example, use a
Switchcraft connector (No. 12BL6M) or equivalent to connect to
the trigger connector port. Contact Switchcraft at (312) 631–1234
for connector availability and pricing.
Package Detector
Interface Box
Interface Box
To Trigger Connector