Connecting System Hardware Together When Using An Interface Box - Allen-Bradley 2755-LS7-SB User Manual

Connecting System
Hardware Together When
Using an Interface Box
Follow the steps starting below to connect your system hardware
together when using an interface box. Refer to appendix B for cable
pinouts.
1. Plug the reader into the interface box.
To Scanner Port
Reader
2. Plug any sinking package detect or relay options to the trigger
connector port on the interface box. For example, use a
Switchcraft connector (No. 12BL6M) or equivalent to connect to
the trigger connector port. Contact Switchcraft at (312) 631–1234
for connector availability and pricing.
Package Detector
Installing Your Hardware
Interface Box
Interface Box
To Trigger Connector
4–5
Publication 2755-6.9