Configuration Codes For The Slc 5/03 And Slc 5/04 Controllers; Slc 5/03 And Slc 5/04 Controllers Setup - Allen-Bradley 2755-LS7-SB User Manual

Configuration Codes for the SLC 5/03 and SLC 5/04 Controllers

After making the necessary connections, set the reader to the settings
in the table below to allow the reader to communicate with the SLC
5/03 or SLC 5/04 controllers.
Description
Preamble
Postamble
Baud Rate
Parity
Stop Bits
Data Bits

SLC 5/03 and SLC 5/04 Controllers Setup

You need to configure the SLC 5/03 and SLC 5/04 controllers.
Follow the steps starting below or refer to the following publications:
•
SLC 500 Modular Hardware Style Installation and Operation
Manual (Publication No. 1747-6.2)
•
SLC 500 and MicroLogixt 1000 Instruction Set Reference
Manual (Publication No. 1747-6.15)
•
Advanced Programming Software User Manual
(Publication No. 9399-APSUM-11.15.95)
1. Set the SLC Channel 0 to User in the Channel 0 Configuration
screen
Application Examples
Menu Setting
Disable <Kd0>
Enable Control J <Kel,^M,^J>
9600
None
<Ka4,0,0,1>
One
8
E–9
Serial Command Setting
Publication 2755-6.9