Serial Verification - Allen-Bradley 2755-LS7-SB User Manual

Command
Beeper Status
0 = On Good
1 = On No Read
Beeper Volume
0 = Off
1 = Level 1
2 = Level 2
3 = Level 3
4 = Level 4
5 = Level 5
Command
Status
0 = Disabled
1 = Enabled
Command
Serial Command Echo Status
0 = Disabled
1 = Enabled
Serial Command Beep Status
0 = Disabled
1 = Enabled
Control/hex Output
0 = Control
1 = Hex
Command
Status
0 = Disabled
1 = Enabled
Start Position
1 to 63. 1 is the default.
Length
1 to 63. 63 is the default.
•
Beeper
Parameter Format
Ku <Kustatus,volume>
•
Laser On/Off
Parameter Format
KC KC <KCstatus> <KCstatus>
•

Serial Verification

Parameter Format
<KSserial command
status,serial command
KS KS
beep status,control/hex
output>
•
User Output Status Request. Allows you to return the status of
each command in the group.
Parameter Format
KX <KX?>
•
Partial Label Output. Allows you to transmit a portion of the
label to the host.
Parameter Format
<KYstatus,start
KY KY
position,length>
Configuring Your Reader
Example
To set the beeper for On No Read and
set the beeper volume to Off, press
[<Ku1 0>]
[<Ku1,0>].
Example
To enable Laser On/Off, press
[<KC1>] [<KC1>].
Example
To enable Serial Command Echo Status, To enable Serial Command Echo Status,
Beep status, and Hex Output, press Beep status, and Hex Output, press
[<KS1,1,1>].
Example
To enable Partial Label Output starting To enable Partial Label Output starting
at character 4 and ending at character 8 at character 4 and ending at character 8
of the string, press [<KY1,4,5>].
[<KY1 4 5>]
Publication 2755-6.9
5–37