Flexible Interface Module
3. Save and exit the configuration.
4. Move internal selector (jumper) to the data entry position on the
system board (B-5, B-6).
5. See Chapter 13 of Enhanced Decoder User Manual (Publication
No. 2755-833) for additional information.
This application example describes how to configure and operate the
readers when using an RS-232 cable connected to the flexible
interface module (Catalog No. 2760-RB).
ATTENTION: Do not install the RS-232 cable with
power applied to either the interface box or flexible
!
interface module. Failure to follow this caution may
result in damage to the reader, interface box, or flexible
interface module.
Refer to the following publications for additional information.
•
Flexible Interface Module User Manual
(Publication No. 2760-ND001)
•
SFC1 or SFC2 Protocol Cartridge User Manuals
(Publication Nos. 2760-ND002 or 2760-822)
Application Examples
Publication 2755-6.9
E–3