Section 13: Installing The Radio - Hangar 9 Easy Fly 40 Instruction Manual

Section 13: Installing The Radio

Parts Needed
4-Channel Radio System with 4 Standard Servos and
Hardware (not included)
Fuselage
Radio Packing Foam (not included)
Wing
Installing the Aileron Servo
1. Locate the wing and one of the standard servos. Put
the servo grommets and eyelets in the servo and place
the servo in the aileron mount. Using a pencil, mark the
four places to be drilled.
2. Remove the aileron servo and drill four 1/16" holes
where marked.
Tools Needed
Drill with 1/16" Drill Bit
Hobby Knife
Pencil
#1 Phillips Screwdriver
3. Place the aileron servo back in its mount and secure it
in place with the four screws included with the servo.
30