Displaying Menu Pages; Setting The Menu - Sony HXC-D70 User Manual

Rear operation panel
Menu control
knob
DISPLAY/
MENU
switch

Displaying Menu Pages

To display a menu page
Set the DISPLAY/MENU switch to MENU.
The menu page last accessed will be displayed. If it is the first
time, the CONTENTS page of the USER menu will be
displayed.
To display the TOP MENU screen
If you set the DISPLAY/MENU switch to MENU while holding
the menu control knob pressed, "TOP" is displayed at the
upper right corner of the screen.
Turn the menu control knob to move the pointer (,) on the
display to "TOP" and push on the knob. The TOP MENU
screen is displayed, listing the available menus.
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
Menu Purpose
USER This menu can include menu pages selected
from among the OPERATION, PAINT,
MAINTENANCE, FILE, and DIAGNOSIS
menus, for convenience. Changing, adding,
and deleting pages can be performed with the
USER MENU CUSTOMIZE menu.
USER MENU This menu allows you to edit the USER menu.
CUSTOMIZE
For details on the USER menu, see "Editing
the USER Menu" (page 53).
ALL This menu permits you to control all items of
the OPERATION menu, PAINT menu,
MAINTENANCE menu, FILE menu, and
DIAGNOSIS menu as a single menu.
OPERATION This menu contains items for camera operators
to operate the camera. It mainly permits
viewfinder, intercom, and switch settings.
Menu Purpose
PAINT This menu contains items for making detailed
image adjustments while using a waveform
monitor to monitor the waveforms output from
the camera. Support of a video engineer is
usually required to use this menu.
Although you can also use an external control
device to set the items on this menu, the menu
is effective when using the camera by itself
outdoors.
MAINTENANCE This menu contains items for performing
camera maintenance operations, such as
changing the system or setting infrequently
used "paint" items.
FILE This menu is for performing file operations,
such as writing or clearing the reference file.
DIAGNOSIS This menu enables you to confirm the self-
diagnostic information.
To disable the "TOP" indication
Turn the power off then on again, or set the DISPLAY/MENU
switch to MENU while holding the STATUS/ CANCEL switch
pressed toward CANCEL. This disables the TOP selection.

Setting the Menu

To select a menu on the TOP MENU screen
Rotate the menu control knob to align the pointer with the
desired menu indication then push on the knob.
The CONTENTS page (page No. 00) or the last accessed
page of the selected menu is displayed.
To select a page from a CONTENTS page
Rotate the menu control knob to align the pointer with the
desired page indication then push on the menu control knob.
If the screen can be scrolled, arrows will
indicate the direction for scrolling.
CONTENTS
01.<VF DISPLAY>
02.<VF DISPLAY2>
03.<'!'IND>
Pointer
04.<VF MARKER>
05.<VF DETAIL>
06.<FOCUS ASSIST>
07.<ZEBRA>
08.<CURSOR>
09.<VF OUT>
10.<SWITCH ASSIGN1>
The selected page is displayed.
<VF DETAIL>
VF DETAIL :
CRISP :
FREQUENCY:
FAT MODE :
FLICKER
00 TOP
Page number
05 TOP
ON 25%
0
9M
OFF
OFF
Basic Menu Operations
51