Setting The Date/Time Of The Internal Clock - Sony HXC-D70 User Manual

3
Turn the menu control knob to select the desired area
of use.
Setting
NTSC AREA
NTSC(J) AREA
PAL AREA
a) The composite signal output from this camera is an NTSC
signal with a black setup (7.5 IRE). The system frequency is
59.94i.
b) The composite signal output from this camera is an NTSC
signal with no black setup. The system frequency is 59.94i.
c) The composite signal output from this camera is a PAL signal.
The system frequency is 50i.
4
Adjust the SYSTEM LINE (picture resolution) settings
Setting
1080
720
5
Set the power switch to OFF and set it to ON again.
The camera is now ready for use.
To adjust the area settings
The settings can be adjusted in MAINTENANCE > OUTPUT
FORMAT > COUNTRY in the setup menu (see page 68).
30

Setting the Date/Time of the Internal Clock

Area of use
NTSC (for areas other than Japan)
b)
NTSC (Japan)
c)
PAL
Resolution (Horizontal x Vertical)
1080 lines (1920 x 1080)
720 lines (1280 x 720)
Setting the Date/Time of
the Internal Clock
a)
When using the camera for the first time, set the built-in clock
to local time, using MAINTENANCE > DATE in the setup
menu (page 69) displayed in the viewfinder.
For details on menu operations, see "Basic Menu Operations"
(page 50).
1
Turn on the camera.
2
While holding the menu control knob pressed, set the
DISPLAY/MENU switch to MENU.
The camera enters menu mode, and "TOP" is displayed at
the upper-right corner of the screen.
3
Rotate the menu control knob to set the pointer (,)
to "TOP" and push on the menu control knob.
The TOP MENU screen is displayed.
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
4
Rotate the menu control knob to position the pointer
to MAINTENANCE and push on the menu control
knob.
The CONTENTS page of the MAINTENANCE menu is
displayed.
01.<AUTO SETUP>
02.<WHITE SHADING>
03.<BLACK SHADING>
04.<AUTO IRIS>
05.<CIS COMP>
06.<AUDIO>
07.<CALL/TALLY>
08.<OUTPUT FORMAT>
09.<DOWN CONVERTER>
10.<TEST OUT>
5
Turn the menu control knob to scroll the page and
position the pointer to <DATE> then push on the
menu control knob.
The <DATE> page is displayed.
<DATE>
DATE/TIME
2011/10/09
6
Turn the menu control knob and set the date and time.
Push on the menu control knob to shift to the next digit.
CONTENTS M00 TOP
M15 TOP
08:32