Operating Menus
This section explains how to configure the
camera using the supplied remote commander.
For details on the menu items, refer to page 33
through page 50.
Displaying a menu
1
Press the DATA SCREEN button.
The main menu is displayed.
2
Use the or button to move the cursor to
the menu item you want to change.
3
Press the HOME button.
The selected menu is displayed.
4
Use the or button to move the cursor to
the setting item you want to change.
5
Use the or button to change the set
value.
Notes
• [IR RECEIVE] cannot be set to [OFF] in the
SYSTEM menu when you operate the menu
with the supplied remote commander. Set [IR
RECEIVE] to [OFF] either using the remote
controller or from the Administrator menu on
the web browser.
• The menu is not displayed on the SDI output
image when the [Menu overlay (SDI)] check box
on the Administrator menu is not selected.
• The menu is not displayed on the HDMI output
image when the [Menu overlay (HDMI)] check
box on the Administrator menu is not selected.
Returning to the main menu
Press the DATA SCREEN button.
Canceling a menu
When the main menu is displayed, press the
DATA SCREEN button once. When a setting menu
is displayed, press the DATA SCREEN button
twice.
31