Mounting And Adjusting The Lens - Sony HXC-D70 User Manual

7
When the date/time setting is completed, set the
DISPLAY/MENU switch to OFF to exit menu mode.
Mounting and Adjusting
the Lens
First power off the camera, and then mount the lens using the
following procedure.
For information about using the lens, refer to the operation
manual for the lens.
Lens mount
securing rubber
1
Push the lens locking lever up and remove the lens
mount cap from the lens mount.
2
Align the center pin on the lens with the center slot in
the lens mount, and insert the lens into the mount.
3
Holding the lens in place, push the lens locking lever
down to lock the lens.
Caution
If the lens is not firmly locked, it may come off while the
camera is being used. This could cause a serious
accident. Make sure the lens is firmly locked. It is
recommended that the lens mount securing rubber be put
on the lens locking lever as illustrated above.
4
Connect the lens cable to the LENS connector.

Mounting and Adjusting the Lens

31