Sony HXC-D70 User Manual page 58

OPERATION
Page title
Page No.
<VF DETAIL>
05 (U02)
Note
The VF detail function is
activated only when either
the CBK-VF01 or DXF-
C50WA viewfinder is
attached to the camera.
<FOCUS ASSIST>
06 (U03)
<ZEBRA>
07 (U07)
<CURSOR>
08 (U08)
<VF OUT>
09 (U01)
58
Menu List
Item Settings
VF DETAIL ON, OFF
0 to 100% 25%
CRISP -99 to 99 0
FREQUENCY 9M, 14M, 18M
FAT MODE ON, OFF
AREA 100%, 70%, 60%, 50%, 40%
ZOOM LINK 0%, 25%, 50%, 75%, 100%
COLOR DETAIL ON, OFF
BLUE, RED, YELLOW
PEAK COLOR ON, OFF
CHROMA LEVEL 100%, 50%, 25%, 0%
INDICATOR ON, OFF, (EFFECT)
MODE BOX, B&W, COL
BTM, LEFT, TOP, RIGHT
LEVEL 1 to 5 3
QUICK, SMOOTH
GAIN 0 to 99 50
OFFSET 0 to 99 50
AREA MARKER ON, OFF, (ASPECT)
SIZE SMALL, MIDDLE, LARGE
POSITION LEFT, CENTER, RIGHT
POSITION H 0 to 99 50
POSITION V 0 to 99 50
ZEBRA ON, OFF
1, 2, 1&2
ZEBRA1 LEVEL 50 to 109% 70
WIDTH 0 to 30% 10
ZEBRA2 50 to 109% 100
CURSOR ON, OFF
WHITE, BLACK, DOT
BOX/CROSS BOX, CROSS
H POSITION 0 to 99 50
V POSITION 0 to 99 50
WIDTH 0 to 99 50
HEIGHT 0 to 99 50
VF OUT COLOR, Y, R, G, B
VF COLOR -99 to 99 0
Description
Adds detail signals to the edges of the subject.
Removes faint detail signals
Changes the detection range for the edge.
Strengthens the added detail signals.
Selects the area displaying the detail signals.
Sets the VF detail level at the full WIDE
position. (Changes the VF detail level according
to the zoom position.)
Displays the detail signals in colors.
Displays the strongest detail signal in colors.
Lowers the chroma level. (Available only for
video signals used in viewfinders)
Displays or hides the focus assist indicator in
the viewfinder.
(EFFECT): Displayed when EFFECT of <VF
MARKER> is ON.
Sets the indicator position and format.
Sets the brightness and response speed of the
indicator.
Sets the gain of the indicator.
Automatically sets the offset value according to
the AREA MARKER SIZE and MASTER GAIN
settings.
Displays or hides the detection area of the focus
as a marker in the viewfinder.
(ASPECT): Displayed when ASPECT SAFETY
of <VF MARKER> is ON.
Changes the detection range. (If larger range
than needed is selected, both the subject and
background are detected. This may prevent the
indicator to function properly.
Roughly sets the position of the detection area.
Finely adjusts the position of the detection area
in the horizontal directions.
Finely adjusts the position of the detection area
in the vertical directions.
Displays or hides the zebra pattern in the
viewfinder.
Sets the zebra pattern format (either of zebra1,
zebra2 or zebra1&2)
Sets the zebra1 level.
Sets the range of the video level of zebra1.
Sets the zebra2 level.
Displays or hides the cursor in the viewfinder.
Sets the color of the cursor.
Sets the display format of the cursor.
Sets the horizontal position of the cursor.
Sets the vertical position of the cursor.
Sets the width of the cursor.
Sets the height of the cursor.
Selects the signal format output from the VF
connectors.
Adjusts the color density of the output signal to
the viewfinder. (Available when the CBK-VF01
viewfinder is attached.)