Sony HXC-D70 User Manual page 67

Hd color camera
Hide thumbs Also See for HXC-D70:
Table of Contents

Advertisement

MAINTENANCE
Page title
Item
Page No.
<CIS COMP>
FLICKER REDUCE
M05
FLASH BAND COMP
<AUDIO>
MIC GAIN
M06 (U14)
CCZ OUT
TEST TONE
<CALL/TALLY>
CCU CALL
M07
CAM CALL
Settings
MODE
AUTO, ON, OFF
FREQ
60 Hz, 50 Hz
COMP
ON, OFF, (OFF)
AUDIO1
20dB, 30dB, 40dB, 50dB, 60dB
AUDIO2
20dB, 30dB, 40dB, 50dB, 60dB
AUDIO 1
ON, OFF
AUDIO 2
ON, OFF
ON, OFF
- - -, ON, OFF
- - -, ON, OFF
Description
Settings related to the flicker compensation
function.
Enables or disables flicker reduction.
AUTO: Enabled when flicker is detected.
ON: Always enabled.
OFF: Disabled
Set to the frequency of the lighting fixture that is
causing the flicker. (The factory default setting
is 50 Hz when the area setting is PAL area, 60
Hz when it is other than PAL area.)
Settings related to the flash band
compensation.
Sets the flash band compensation function to
on or off.
(OFF): Displayed when the shutter function is
activated.
– ON can be selected only when the shutter
function is deactivated.
– The COMP setting is automatically switched
from ON to (OFF) when the shutter function
becomes activated. The setting returns to ON
when the shutter function becomes
deactivated.
Sets the input gain of the AUDIO 1 IN connector
for an external microphone.
Settings in ( ): When HXCU-D70 is connected
(cannot be changed)
Sets the input gain of the AUDIO 2 IN connector
for an external microphone.
Settings in ( ): When HXCU-D70 is connected
(cannot be changed)
Adjusts the microphone output settings when
the CCU-D50/D50P is connected.
Outputs the audio signal input from the AUDIO
1 IN connector to the CCU.
Settings in ( ): When HXCU-D70 is connected
(cannot be changed)
Outputs the audio signal input from the AUDIO
2 IN connector to the CCU.
Settings in ( ): When HXCU-D70 is connected
(cannot be changed)
Sets the test tone function to on or off.
Returns to OFF every time the power is turned
on.
Displays the CALL signal from the CCU.
- - -: When a CCU is not connected
Displays the CALL signal from the camera.
- - -: When a CCU is not connected
67
Menu List

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents