Chapter 2 Preparations; Connecting A Camera Control Unit (Ccu); To Use The Cable Clamp Belt - Sony HXC-D70 User Manual

Preparations
Connecting a Camera
Control Unit (CCU)
When operating the camera in a system with a CCU, connect
between the CCU connector of the camera and the CAMERA
connector of the CCU, using a multi-core cable.
When required, secure the cable, using the supplied cable
clamp belt.

To use the cable clamp belt

1
Insert the belt bracket C into hole A or B of the cable
clamp belt.
C
2
1 Remove the screw-hole cover on the top rear of the
camera and 2 secure the cable clamp belt to the
camera, using the two supplied screws (+B3×10).
1
B
A
2
Chapter
3
1 Release the buckle, 2 bundle the cable with the
belt, 3 then lock the buckle again.
1
4
Adjust the length by pulling down the end of the belt.

Connecting a Camera Control Unit (CCU)

2
3
2
21