Accessory Attachments - Sony HXC-D70 User Manual

Accessory Attachments

a Cable clamp attachment
Attach the supplied cable clamp.
b Shoulder strap fitting
Attach an optional shoulder strap (A-6772-374-C) (see
page 36).
c Fitting for optional microphone holder
Fit an optional CAC-12 microphone holder (see page 33).
d Lens cable clamp
Clamp a lens cable.
e Viewfinder front-to-back positioning lock knob
Loosen this knob to adjust the front-to-back position of the
viewfinder (see page 24).
f VF (viewfinder) connector (20-pin, round)
Connect a cable supplied with an optional viewfinder (DXF-51,
DXF-C50WA or DXF-20W).
g Viewfinder left-to-right positioning ring
Loosen this ring to adjust the left-to-right position of the
viewfinder (see page 24).
12
Locations and Functions of Parts and Controls
h 1/4-inch-screw-type accessory shoe
i Slide-type accessory shoe
j Viewfinder front-to-back positioning lever
To adjust the viewfinder position in the front-to-back direction,
loosen this lever and the lock knob. After adjustment, retighten
this lever and the lock knob.
k Viewfinder fitting shoe
Attach a viewfinder.
For information on attaching the DXF-801 viewfinder, see
"Attaching the DXF-801 viewfinder" (page 27).
l VF (viewfinder) connector (26-pin, rectangular)
Connect the viewfinder provided with HXC-D70K and HXC-
D70L.
m Lens mount securing rubber
After locking the lens in position using the lens locking lever,
fit this rubber over the lower of the two projections. This fixes
the lens mount, preventing it from coming loose.
n Lens mount (special bayonet mount)
Attach a lens.
Consult your Sony dealer or a Sony service representative for
information about available lenses.