Default Interface And Zone Configuration - ZyXEL Communications USG-300 - V2.20 ED 2 Manual

Chapter 6 Configuration Basics

6.2.2 Default Interface and Zone Configuration

This section introduces the ZyWALL's default zone member physical interfaces and
the default configuration of those interfaces. The following figure uses letters to
denote public IP addresses or part of a private IP address.
Figure 56 Default Network Topology
Table 14 Default Port, Interface, and Zone Configuration
PORT
1
2, 3
4, 5
6
7
AUX
CONSOLE N/A
• The LAN zone contains the ge1 interface. The LAN zone is a protected zone. The
ge1 interface uses 192.168.1.1.
96
IP ADDRESS AND DHCP
INTERFACE ZONE
SETTINGS
ge1 LAN 192.168.1.1, DHCP server
enabled
ge2, ge3 WAN DHCP clients
ge4, ge5 DMZ 192.168.2.1 (ge4) and
192.168.3.1 (ge5), DHCP
server disabled
ge6 WLAN 10.59.0.1, DHCP server
enabled
ge7 None None, DHCP server
disabled
aux None None
None None
SUGGESTED USE WITH
DEFAULT SETTINGS
Protected LAN
Connections to the Internet
Public servers (such as web,
e-mail and FTP)
Wireless access points
Optional
Auxiliary modem
Local management
ZyWALL USG 300 User's Guide