Change Individual Code - Bosch AMAX 2100 User Manual

AMAX
15. Press [#].
16. Optionally select the keyfob button 3 function.
17. Press [#].
P
4
Notice!
This function is automatically terminated if you do not press a button within 240 seconds or if
you press [#]. One long beep indicates that the code already exists or that you entered an
incorrect user number.
9.2

Change Individual Code

This function allows users to change the individual user code.
1.
2.
3.
P
Bosch Sicherheitsysteme GmbH
The keyfob ID will be entered automatically.
The system beeps twice. The new user code is added/changed.
Press [-] twice to exit.
Enter your code + [5] [5] and press [#].
The system beeps twice and the STAY and AWAY indicators start flashing. The current
user code is displayed.
Enter a new code with a default length of four digits. (A code with five or six digits is also
possible but has to be enabled by the installer.)
Press [#].
The system beeps twice and the STAY and AWAY indicators stop flashing. The user code
is changed.
User Guide
Codes | en 25
2014.09 | 03 | F.01U.295.569