22
en | Macros
8
Macros
Macros are used to assign complicated or often used operation to one button to simplify the
operation of the system. It is possible to record up to three macros.
Notice!
This function can only be operated with a text keypad.
8.1
Recording Macros
How to Record a Macro
1.
2.
3.
4.
P
Example of Recording a Macro: Bypassing a Zone
This example shows how to assign macro 1 to bypassing zone 3. This can be useful if you want
to bypass zone 3 on a regular basis.
In this example there are no bypassed zones yet.
1.
2.
3.
4.
5.
6.
7.
8.
P
2014.09 | 03 | F.01U.295.569
Enter your code + [8] and the number to which you want to assign the macro. (Possible
numbers are 1, 2 and 3.)
Press [#].
The system beeps twice.
Perform the operation you want to assign to the macro.
Press [#] for three seconds.
The system beeps three times. The macro is recorded and the operation is executed.
Enter your code + [8] [1].
Press [#].
The system beeps twice.
Enter your code + [3] [1] + [#] for bypassing zones (see also Bypassing/Unbypassing
Zones, page 20).
The STAY indicator flashes fast. The available zones are shown. Unavailable zones are
marked with an x.
Enter [0] [3] for bypassing zone 3.
Zone 3 is checked.
Press [#] to confirm.
Press [#] to exit the bypass menu.
Press [#] for three seconds to exit the record macros menu.
The system beeps twice. The macro 1 for bypassing zone 3 is recorded. Zone 3 is
bypassed.
User Guide
AMAX
Bosch Sicherheitsysteme GmbH