System Test; Siren Test; Communication Test; Walk Test Mode - Bosch AMAX 2100 User Manual

AMAX
5

System Test

5.1

Siren Test

This function allows the users to test the siren.
4
P
5.2

Communication Test

This function allows the users to send a test report to a central monitoring station.
1.
2.
5.3

Walk Test Mode

This function allows users to test detection devices to ensure they are functioning correctly.
Bypass any zones that are not required for testing before activating the walk test mode.
During the walk test, no walk test report is sent out to the control panel system.
How to Select Walk Test Mode:
1.
2.
P
How to Exit Walk Test Mode:
4
Bosch Sicherheitsysteme GmbH
Enter your code + [4] [1] and press [#].
The system beeps twice and the siren is activated for one second.
Enter your code + [4] [2] and press [#].
The system beeps twice and a test report is send.
The keypad displays the status of the test report for all communication paths.
Press [#] to exit.
Enter your code + [4] [3] and press [#].
The system beeps twice and the STAY and AWAY indicators flash.
Unseal and seal the zones to be tested.
The system beeps. The siren beeps once each time a zone status is changed.
Enter your code + [4] [3] and press [#].
User Guide
System Test | en 19
2014.09 | 03 | F.01U.295.569