Bypassing; Bypassing/Unbypassing Zones; How To Bypass/Unbypass A Zone Via Text Keypad; How To Bypass/Unbypass A Zone Via Led/Lcd Keypad - Bosch AMAX 2100 User Manual

20 en | Bypassing
6

Bypassing

6.1

Bypassing/Unbypassing Zones

One or more zones can be disabled for one arming cycle. After bypassing a zone, you can arm
the system even when a zone is in alarm state.
6.1.1

How to Bypass/Unbypass a Zone via Text Keypad

1.
2.
3.
4.
5.
6.
6.1.2

How to Bypass/Unbypass a Zone via LED/LCD Keypad

1.
2.
3.
4.
5.
6.2

Bypassing Faults or Tamper Conditions

One or more faults or tamper conditions can be disabled for one arming cycle. After bypassing
a fault or tamper condition, you can arm the system even when a fault or tamper condition
exists.
Only zone tampers can not be bypassed.
How to bypass a Fault or Tamper Condition
4
P
2014.09 | 03 | F.01U.295.569
Enter your code + [3] [1] and press [#].
The STAY indicator flashes fast. The available zones are shown. Already bypassed zones
are checked. Unavailable zones are marked with an x.
Use [▲] and [▼] to display all zones.
Enter the two-digit zone number you wish to bypass/unbypass.
The selected zone is checked/unchecked.
Repeat step 3 if you want to bypass/unbypass multiple zones.
Press [#] to confirm.
Press [#] to exit.
Enter your code + [3] [1] and press [#].
The STAY indicator flashes fast. The lit number indicators show the bypassed zones. If no
numbers are lit, no zones are bypassed yet.
Enter the zone number you want to bypass/unbypass.
Press [*].
The system beeps twice. The corresponding number indicator is lit/extinguished.
Repeat step 2 if you want to bypass/unbypass multiple zones.
Press [#] to exit.
Enter your code + [3] [4] and press [#].
The system beeps twice and fault or tamper conditions are bypassed.
User Guide
AMAX
Bosch Sicherheitsysteme GmbH