Change Individual Code - Bosch AMAX 2100 User Manual

20 en | Codes
03 = Arming User
04 = Duress User
05-15 = No Permission
d) Enter the value (00-71) for the area assignment for this user and press [#].
Please contact your installer for the right Values or check Table in Quick Reference Guide.
e) Enter the new user code (Default code length=4 digits / 5 or 6 digit code must be enabled
through the installer) and press [#].
It beeps twice and the Keypad shows the next user.
f) Press long [-] to exit.
Notice!
This function is automatically terminated if you do not press a button within 240 seconds or if
you press [#]. One long beep indicates that the code already exists or that you entered an
incorrect user number.
8.2

Change Individual Code

This function allows user to change the individual code.
How to change the code
a) Enter your code + [5] [5] [#] and press.
It beeps twice and the STAY and AWAY indicators start flashing.
b) Enter the new code (Default code length=4 digits / 5or 6 digit code must be enabled
through the installer) and press [#].
It beeps twice and the STAY and AWAY indicators stop flashing.
2014.01 | 02 | F.01U.295.569 User Guide
AMAX
Bosch Sicherheitsysteme GmbH