Playing Macros - Bosch AMAX 2100 User Manual

AMAX
8.2

Playing Macros

How to Play a Macro
There are two methods to play a macro.
Method 1:
4
P
Method 2 (Quick Play):
4
P
Please contact your installer to enable/disable this function.
Notice!
Please note that the play function has to be enabled/disabled individually for every user.
Please refer to Add/Change User Codes, page 24.
Example of Playing a Macro: Bypassing a Zone
This example shows how to play macro 1 for bypassing zone 3 (see the example in Recording
Macros, page 22).
4
P
P
Bosch Sicherheitsysteme GmbH
Enter your code and press the number on which the macro is assigned for three seconds.
(Possible numbers are 1, 2 and 3.)
The system beeps and the operation which is assigned to the macro is executed
automatically.
Press the number on which the macro is assigned for three seconds. (Possible numbers
are 1, 2 and 3.)
The system beeps and the operation which is assigned to the macro is executed
automatically.
Enter your code and press [1] for three seconds.
The system beeps and the macro 1 is executed automatically.
If zone 3 was unbypassed before playing macro 1, it is bypassed now.
If zone 3 was bypassed before playing macro 1, it is unbypassed now.
User Guide
Macros | en 23
2014.09 | 03 | F.01U.295.569