Quick Keypad Operations Instructions - Bosch AMAX 2100 User Manual

10 en | Short information
2.4

Quick Keypad Operations Instructions

The following table shows an overview of the quick keypad operations and the corresponding
user permissions. For information on changing codes and defining user permission levels,
please refer to Codes, page 24.
Function
Arm/Disarm
AWAY Arm
AWAY Arm All Areas (only
on master keypad)
Direct AWAY Arm (only on
master keypad
STAY Arm
STAY Arm All Areas (only
on master keypad)
Direct STAY Arm (only on
master keypad
Disarm
Disarm All Areas (only on
master keypad)
Display
Display Info (Fault/Tamper
Analysis)
Bypass
Bypass/Unbypass Zone
Bypass Fault/Tamper
Reset
Reset Fault/Tamper (In
some country versions only
the installer can reset a
tamper alarm)
Macros
Record Macro 1
2014.09 | 03 | F.01U.295.569
Command
Default User Code = 2580
[code] + [#] / [#] for 3 sec. (quick arm)
[code] + [0] [0] + [#]
[code] + [2-digit area no.] + [#]
[code] + [*] / [*] for 3 sec. (quick arm)
[code] + [0] [0] + [*]
[code] + [2-digit area no.] + [*]
[code] + [#]
[code] + [#]
[code] + [2] [1] + [#]
[code] + [3] [1] + [#] + [2-digit zone no.]
+ [#]
[code] + [3] [4] + [#]
[code] + [6] + [#]
[code] + [8] [1] + [#] + operation + [#]
for 3 sec.
User Guide
AMAX
D A B S M M I
1 2 N
√ √ √ √ √ √ √
√ √ √ √ √ √ √
√ √ √
√ √ √ √ √ √ √
√ √ √ √ √ √ √
√ √ √
√ √ √ √ √ √
√ √ √ √ √ √
√ √ √
√ √ √ √ √
√ √ √
√ √ √
√ √ √ √
Bosch Sicherheitsysteme GmbH