Introduction And Safety Instructions - Bosch IUI-UEZ-BE1000s Operating Manual

Introduction and safety instructions

Introduction to operation
The remote keypad can only be operated by
trained personnel.
For safety reasons and to prevent faulty op-
eration, the authorization code for operating
the system should only be provided to these
people.
Under certain conditions, the keypad is inac-
tive, i.e. inoperable
Detection area is armed. The keypad has
been allocated to the armed detection area.
Detection area is armed. The keypad has
been programmed to "dark when armed".
Holdup alarm in the system. The keypad
has been programmed to "dark if holdup".
What will this operating manual tell you
This manual contains all information required
for interpreting the message display and op-
erating the keypad.
What this operating manual will not tell
you
The operating manual does do not provide
any information regarding general or special-
ized technical/safety knowledge.
Therefore: Please ensure that you are famil-
iar with all safety/technical procedures and
guidelines in your area (e.g. what to do in the
event of an alarm, application plans, alarm
organization, etc.).
Notes regarding cleaning
When cleaning the surface of the keypad,
particularly the user interface and display
unit, ensure that no corrosive or abrasive
cleansers are used and that no fluid pene-
trates into the inside of the unit.
- 3 -