Table of Contents
Advertisement
Custom Presets
System Setup
Item
Maximum No. of Sets
Auto Power Off feature
Output Sets
(Collated)
Size Mismatch Warning
Output to Finisher
6
6-2 Displaying the Tools Mode Screen, and 6-3 Configuring the Machine with Tools Mode
Image Quality
Item
Lighter/Darker Level
6-2 Displaying the Tools Mode Screen, and 6-3 Configuring the Machine with Tools Mode
146
6-1 List of Custom Preset Functions
This feature allows you to impose restrictions on, for example, the maximum
number of copies, and Auto Power Off Timer.
Description
Select the maximum number of sets that can be made.
Set this option to enable/disable the Auto Power Off Timer in
Time-Outs.
Set the output orientation for collated sets. In the case of
Auto, all collated output will face down. In the case of Face
Up, all collated output will face up.
If the document glass is used to make copies, select the
copy method if the orientation of the size detected by the
machine is different from the paper orientation. If you select
No, the Size Mismatch Warning screen will not be displayed
and you can copy by selecting the desired copy method.
Alternatively, you can select Yes to display the Size
Mismatch Warning screen and proceed with your copy job
after selecting the copy method. When Auto Correct is
selected, the Size Mismatch Warning screen is not
displayed. The copy job will be carried out after adjustments
have been made automatically if you have selected Off for
Image Rotation.
If the finisher is installed, this setting allows you to prohibit
the output to the finisher should the paper size be changed
during copying.
Description
This setting allows you to select seven levels of copy density
from the fifteen levels. The levels selected here correspond
to the seven levels of copy density from Lightest-Normal-
Darkest setting.
Available Options
1 to 999 sets (999 sets*)
Enable, Disable*
Auto*, Face Up
No, Yes, Auto Correct*
Enable*, Disable
* indicates the factory default.
Available Options
1 to 15
(Lightest to Darkest: 2*, 4*, 6*,
7*, 10*, 12*, 14*)
* indicates the factory default.
Advertisement
Table of Contents
