Table of Contents
Advertisement
Chapter 3 Loading Documents for
information on how to load
documents.
The screen on the right has the tray
6 (high capacity feeder), and finisher
installed.
Output/Finishing can also be
selected on the Features Menu
screen
The screen on the right has the
finisher feature installed.
The factory default is Auto.
Select Cancel to cancel the settings.
If the punch scrap container
becomes full, the Large Output
feature cannot be used. See 8-7
Emptying the Punch Scrap
Container .
Some features cannot be selected
together with this feature. See
Appendix B Possible Combinations
of Features for details.
Procedure
Load the document.
Use the DADF. If the number of originals is 51 and above, divide them into
smaller numbers for loading. A total of up to 700 sheets can be scanned
continuously.
From the Basic Features screen, select Output/Finishing.
To produce collated sets from the documents loaded on the
document glass, select Collated/Finishing. To produce
uncollated sets from the originals loaded onto the DADF, select
Uncollated.
When the finisher is installed, select Large Output if your output is more than
500 copies. The output will be delivered to finisher tray 2.
Select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Basic Features
4-7 Collating Copy Output (Output/Finishing)
4
65
Advertisement
Table of Contents
