Paper Jam At Tray 5 (Bypass) - Panasonic DP-6000 Operating Instructions Manual

Digital imaging systam
Hide thumbs Also See for DP-6000:
Table of Contents

Advertisement

This message will not appear and
the machine will not resume its
operation if the tray is not closed
properly. If sheets of paper are also
jammed at other locations, other
error messages will be displayed.

Paper jam at tray 5 (bypass)

Remove the jammed paper by following the procedures shown below.
Procedure
Pull out the paper tray that
is shown on the display.
Remove the jammed
paper.
Push the tray in slowly until
it stops.
"Ready to copy. Press Start to
continue or press C button to
cancel the job." is displayed once
you have removed the paper and
pushed the tray in.
The following messages will be shown on the display if paper is jammed at
tray 5 (bypass).
Paper Jam
Troubleshooting
Remove all paper from Tray 5 (Bypass)
and reload.
If this message persists, pull out Tray 5
and push in the tray again.
7-2 Paper Jams
7
169

Advertisement

Table of Contents
loading

Table of Contents