Table of Contents
Advertisement
5-10 Selecting the Original
Orientation (Original Orientation) for
details.
Some features cannot be selected
together with this feature. See
Appendix B Possible Combinations
of Features for details.
If the total sheet number of your
document is an odd number, the last
sheet will be made a one sided
copy. If you place the document on
the document glass, then you have
to repeatedly place each page and
press Start to make two sided
copies. If the last scanned page is
side one, select End Job.
Making two sided copies from two sided originals
The screen on the right has the tray
6 (high capacity feeder), and finisher
installed.
2 Sided can also be selected on the
Features Menu screen.
The factory default is 1
1 Sided.
Select Cancel to cancel the settings.
When making two sided copies, use
the DADF. The document glass can
only be used for making one sided
copies.
Select the corresponding document orientation of the original
loaded, and select Save.
Select Head to Top or Head to Left.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
The copies are made on both sides of the paper.
Procedure
On the Basic Features screen, select 2 Sided.
Select 2
2 Sided.
Basic Features
4-6 Copying on Two Sides (2 Sided)
4
61
Advertisement
Table of Contents
