Table of Contents
Advertisement
Basic Features
Specifying original/copy size (Calculator %)
The machine will automatically
adjust the ratio to 25% if the
calculated ratio is 25% or below, and
400% if the calculated ratio is 400%
and above.
The factory default for Reduce/
Enlarge is 100%.
Reduce/Enlarge can also be
selected on the Features Menu
screen.
The screen on the right has the tray
6 (high capacity feeder), and finisher
installed.
4
Select Cancel to cancel the settings.
52
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%)
The machine will make copies of your original based on the ratios calculated
from the measurements of the original and the copy that you have entered.
Procedure
On the Basic Features screen, select Reduce/Enlarge.
Select Independent X-Y%.
Select Calculator %.
Advertisement
Table of Contents
