Daily Care
5-2 Adjusting Copy Density (Lighter/
Darker)
for information on how to
adjust the copy density.
The screen on the right is when the
Auditron feature is enabled. See
Chapter 9 Using the Auditron
Feature
for details.
8
8-3 Increasing the Toner Level
198
Increasing the Toner Level
If you find that copies made are too light, you can increase the copy density
by adjusting the toner level. This feature can be used besides the Lighter/
Darker feature to adjust the copy density. However, normally there is no
need to use this feature because the toner quantity of the developer unit is
automatically adjusted by the machine.
Procedure
Press Settings/Meter Check.
Select Toner Level Adjustment.
Select Start.