Table of Contents
Advertisement
The screen on the right has the tray
6 (high capacity feeder) installed.
Auto, tray 1, tray 6 (high capacity
feeder) cannot be used as the tray
for transparencies.
Auto, tray 5 (bypass) cannot used as
the tray for separators and
distribution sets.
Select different trays for
transparencies and separators/
distribution copies.
Select Cancel to cancel the settings.
Loading Paper in tray 5 (bypass) of
2-3 Loading Paper .
Some features cannot be selected
together with this feature. See
Appendix B Possible Combinations
of Features for details.
Select the paper tray to be used, and select Save.
Confirm the settings, and select Save.
Load transparencies in tray
5 (bypass).
Load them in the same orientation
as the separators/paper used for
distribution sets.
(If the tray is changed in
Step 5, load them in that
tray.)
Select other features if necessary.
If Blank Sep & N Sets is selected in Step 3, enter the number
of sets for distribution copies with the keypad.
Only one set of the transparencies is copied.
Press Start.
Copies are made on the transparencies and they are delivered with separators
inserted between them.
If Blank Sep & N Sets is selected, the number of sets entered for distribution
copies are also delivered.
5-9 Interleaving Blank Sheets between Transparencies (Transparency Separators)
Added Features
5
101
Advertisement
Table of Contents
