Table of Contents
Advertisement
Chapter 3 Loading Documents f or
information on how to load
documents.
The screen on the right has the
finisher installed.
Original Size can also be selected
from the Customised Features
screen.
The factory default of Document
Size Input is Auto Detect.
Select Cancel to cancel the settings.
When copying an open bound
document, specify the dimensions of
the combined area of its facing
pages as the document size. When
copying only one side of an open
bound document, specify only the
area of the side that is to be copied.
You can also simply use the ruler
markings on the document glass to
determine the size of your original.
When
is pressed continuously,
the screen changes rapidly.
Some features cannot be selected
together with this feature. See
Appendix B Possible Combinations
of Features for details.
Procedure
Load the document.
Select Features Menu. Then select Original Size.
Select the desired original size.
Use the
buttons to enter the length (X) and width (Y) of the document
manually. You can specify a value between 1-432 mm for the length (X) and a
value between 1-297 mm for the width (Y).
Confirm the settings, and select Save.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
Copies are made according to the size specified in Step 3.
Added Features
5-12 Selecting the Original Size (Original Size)
5
107
Advertisement
Table of Contents
