Table of Contents
Advertisement
Added Features
This feature is only available when
the document is placed on the
document glass.
The factory default for Reduce/
Enlarge is 100%.
In the case of non standard size, or
when you wish to repeat only a part
of the image, enter the document
size, and specify the the scan area.
See 5-12 Selecting the Original Size
(Original Size) on the method of
specifying the document size.
5
The screen on the right has the
finisher installed.
114
5-16 Repeating an Image (Repeat Image)
Repeating an Image
The Repeat Image feature allows you to reduce the document image and
repeat it on a single sheet of copy paper. The same image can be repeated
up to six times to create six identical images on both short and long edges.
To copy the image in the same size as the original, set the number of
repeats so that they fit on the paper.
If Auto % is selected for Reduce/Enlarge, the repeated images will be
reduced/enlarged to fit the paper selected, and copied.
Procedure
Select Features Menu. Then select
Select Repeat Image.
(Repeat Image)
Next Page.
Advertisement
Table of Contents
