Resetting The Time; Remote Management Control; Table 22-1 Time And Date Setting Fields - ZyXEL Communications VES-1000 Series User Manual

VES-1000 Series Ethernet Switch
FIELD
Use Time Server
when Bootup
Time Server IP
Address
Current Time
New Time
Current Date
New Date
Time Zone
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel"
to save your configuration, or press [ESC] to cancel.
22.2.1

Resetting The Time

The VES resets the time in three instances:
i. On leaving menu 24.10 after making changes.
ii. When the VES boots up and there is a time server configured in menu 24.10.
iii. 24-hour intervals after starting.

22.3 Remote Management Control

Remote management control is for managing Telnet, Web, FTP and ICMP services. You can customize the service
port and the secured client IP address to enhance security and flexibility.
To disable remote management of a service, select Disable in the corresponding Server Access field.
Enter 11 from menu 24 to bring up Menu 24.11 – Remote Management Control.
22-2

Table 22-1 Time and Date Setting Fields

Enter the time service protocol that your time server sends when you turn on the VES. Not
all time servers support all protocols, so you may have to check with your ISP/network
administrator or use trial and error to find a protocol that works. The main differences
between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of seconds since
1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
None is the default value. Enter the time manually. Each time you turn on the VES, the
time and date will be reset to 2000-1-1 0:0:0.
Enter the IP address of your time server. Check with your ISP/network administrator if you
are unsure of this information.
This field displays an updated time only when you reenter this menu.
Enter the new time in hour, minute and second format.
This field displays an updated date only when you reenter this menu.
Enter the new date in year, month and day format.
Press [SPACE BAR] to set the time difference between your time zone and Greenwich
Mean Time (GMT).
DESCRIPTION
System Maintenance 2