VES-1000 Series Ethernet Switch
LABEL
Reset System
Click this button to restart the line card. A warning dialog box displays asking if you're sure
you want to restart the system. Click OK to proceed.
Clear Sys Log
Click this button to clear the log of events in the multi-line text box.
IP Address
Type the IP address of a device that you want to ping in order to test a connection.
Ping
Click this button to have the line card ping the IP address (in the field to the left) 3 times.
13.3 DSL Line Diagnostic Screen
Click Diagnostic in the navigation panel and then the DSL Line link to open the DSL Line diagnostic screen.
This read-only screen displays information to help you identify problems with the DSL connection.
The following table describes the labels in this screen.
LABEL
General
VDSL
Upstream/Downstream
Status
13-2
Table 13-1 General Diagnostic
Figure 13-2 DSL Line Diagnostic
Table 13-2 DSL Line Diagnostic
Click this link to go to the first diagnostic screen.
The following parameters apply to both upstream and downstream VDSL.
DESCRIPTION
DESCRIPTION
Diagnostic