Yanmar 6LY3 series Service Manual page 83

Disassembling the Engine and Components
12/05
Items
Cleaning Agent for Turbocharger
O-Ring Kit
Usual Contents
Ø1.9 x 2 m: 1
(0.074 x 6.5 ft)
Ø2.4 x 2 m: 1
(0.09 x 6.5 ft)
Ø3.1 x 2 m: 1
(0.122 x 6.5 ft)
Ø3.5 x 2 m: 1
(0.137 x 6.5 ft)
Ø5.7 x 2 m: 1
(0.224 x 6.5 ft)
®
NOTICE: Three Bond
the recommended sealants used for assembly.
Before providing service, observe the cautions
below:
1. Build up each sealant bead equally.
2. For bolt holes, apply the sealant to the inside
surface of each hole.
®
3. Three Bond TB1104 (Gray) or Three Bond
TB1102 (Yellow) is used with a gasket. The use
of either of these sealant bonds without a
gasket is not effective.
4. When gaskets are used, do not use sealant
®
Three Bond TB1212.
6LY3 Service Manual
Usual Contents
4 L (1 gal) x 4
18 L (5 gal) x 1
15 sets: 1,
500 cc (1 pt) x 6
liquid gasket products are
© 2007 Yanmar Marine International
Features and Application
Special cleaning agent that requires no water, specially
designed for blower of turbocharger and intercooler.
Features and Application
O-ring of any size can be prepared, whenever required (including
adhesive, release agent, cutter and jig).
Figure 5-1
(4)
®
1 – Oil Pan Mating Surface
2 – Inside of Oil Pan
3 – Bead of Three Bond
4 – Outside
ENGINE
(1)
(2)
(3)
0005770
Figure 5-1
®
TB1212
5-17