Ecu Control Data Management - Yanmar 6LY3 series Service Manual

Electronic Control System
12/05

ECU Control Data Management

In order to prevent the misuse or illegal operation of an engine's control system, the control program and
data are managed by a production system. In addition, Yanmar's production data management system can
provide the correct data for replacing an ECU and / or fuel injection pump when it is necessary.
ECU Control Data Management In Factory
The flow of ECU control data management in the factory is shown in Figure 6-51. Control program, data
map and data are assigned to a part number for each engine model. Engine production data and adjustment
data are specific for each engine and injection pump. The ECU control data for each engine is stored in the
factory server after running tests in the factory.
Figure 6-51
PRODUCTION
ORDER
ENGINE MODEL
SERIAL NUMBER
6LY3 Service Manual
DATA SERVER
in factory
Figure 6-51
© 2007 Yanmar Marine International
FUEL SYSTEM
PRODUCTION
SYSTEM
PROGRAM / MAP
PRODUCTION DATA
ADJUSTMENT DATA
ECU
0005715
6-41