Installing The Engine Air Ducts; Installing The Engine Turbocharger - Yanmar 6LY3 series Service Manual

ENGINE

Installing the Engine Air Ducts

1. Fit the air duct (Figure 5-127, (4)) to the outlet
of the turbine with a gasket (Figure 5-127, (3))
and a V-clamp (Figure 5-127, (2)).
Figure 5-127
(1)
(5)
(7)
Figure 5-127
1 – Turbocharger
2 – V-Clamp
3 – Gasket
4 – Air Duct
5 – Clamp
6 – Hose
7 – Intercooler
8 – Air Flow from Turbocharger
2. Fit the air duct to inlet of the intercooler
(Figure 5-127, (7)) by using the hose
(Figure 5-127, (6)) and the clamp
(Figure 5-127, (5)).
5-74
(2)
(3)
(4)
(5)
(6)
(8)
0005829
© 2007 Yanmar Marine International
Assembling the Engine and Components

Installing the Engine Turbocharger

1. Loosely assemble bracket "A"
(Figure 5-128, (4)) to bracket "B"
(Figure 5-128, (5)) using two M10 x 18 bolts.
Figure 5-128
(1)
(2)
(3)
(1)
(4)
2. Bolt, M10 x 18
3. Bolt, M10 x 18
(5)
(6)
Figure 5-128
1 – Turbocharger
2 – Mixing Elbow
3 – Air Silencer
4 – Bracket "A"
5 – Bracket "B"
6 – Flywheel Housing
2. Install and finger tighten the two M10 x 22 mm
bolts in the engine.
3. Install the turbocharger (Figure 5-128, (1)) with
its attached oil line and loosely install two
M10 x 18 mm bolts through bracket "A" and into
the turbocharger.
6LY3 Service Manual
0005830
1. Bolt, M10 x 22
0005831