Event Status; Figure 41 ─ Event Status Setup Screen - Eneo DLR-1004/500V Operating Instructions Manual

Event Status

Highlight Event Status in the Event menu and press the
screen appears.
Figure 41 ─ Event Status setup screen.
Disk Almost Full will be highlighted when the DVR is not in the Recycle mode and the level of
disk usage reaches the Disk Almost Full percentage you made in the System Event setup screen
on the Event menu. Disk Full will be highlighted when the DVR is not in the Recycle mode and
all available storage space has been used.
Check Recording will be highlighted when the event is detected based on the settings you made
in the System Event setup screen on the Event menu.
Highlighting the Storage tab will display the hard disk drive status. Refer to the Storage section
for details.
4-Channel Digital Video Recorder
button. The Event Status setup
The Event Status screen displays the status of
the DVR's systems and inputs. Events will be
highlighted, and related channels or events will
flicker for five seconds when detected.
Motion and Video Loss will be highlighted
when each event is detected based on the settings
you made in the Motion Detection and Video
Loss setup screen on the Event menu.
35