Ending A Call; Using Hold And Resume - Cisco 7920 Phone Manual

Ending a Call

To end a call, simply hang up. Here are some more details.
If you want to...
End the call
Disconnect one call, but preserve
another call on the same line

Using Hold and Resume

You can hold and resume calls.
If you want to...
Put a call on hold
Remove a call from hold on the
current line
Remove a call from hold on a different
line
Move a call on a shared line between
your wireless phone and your desk
phone
Tips
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the call-on-hold icon:
30
Then...
Choose EndCall or
Press EndCall. If necessary, remove the call from hold first.
Then...
1. Make sure the call you want to put on hold is
highlighted.
2. Press Hold.
1. Make sure the appropriate call is highlighted.
2. Press Resume.
1. Press to change to another line.
2. Press Resume.
Note If a single call is holding on this line, the call
automatically resumes. If another call is holding, scroll
to the appropriate call and press Resume.
1. From your phone with the active call, press Hold.
2. From your other phone with the shared line, press
Resume.
.
(red key) to hang up.
OL-9474-01