Interconnection And Wiring; Recommended Cable; Loop Card Connections - GE 1200 Series Interconnection And Wiring Manual

1200-2000 Series Fire Panels, Repeaters, and Emulators
8
Interconnection and Wiring Guide

3 Interconnection and wiring

The following sections describe the cabling and system interconnection requirements for your
product.
3.1

Recommended cable

Twisted and screened cable is required for all installation cabling. The cable screen should be
connected to the earth stud in the panel.
3.2

Loop card connections

Connect the loop card as shown below and select the loop Class required (see Section 3.2.1).
Figure 3: Loop card connections
1. Class B loop 1
2. Class B loop 2
3. Class B loop 3
4. Class B loop 4
5. Class A loop 1
6. Class A loop 2
7. Class A loop 1 forward
8. Class A loop 1 return