Miele Built-in coffee machine Operating And Installation Instructions page 62

Problem solving guide
Message
Fault 75
"Push the water
container in until it
engages"
"Empty the drip
tray" appears in
the display, even
though the drip
tray is empty.
62
Possible cause and remedy
^ Using a spoon handle or similar, push the capsule back
into the waste container.
^ Close the appliance door.
If this fault message appears in the display again, or you
cannot remove the capsule, call Miele.
The water container is not in the correct position.
^ Remove the water container and push it back in again.
This fault message also appears if the water container was
not correctly filled for descaling.
^ Fill the water container to the descaling symbol F and
restart the descaling programme.
If this fault message appears in the display again, contact
Miele.
The drip tray is not sitting correctly in the appliance.
^ Push the drip tray all the way into the appliance.
The drip tray sensing mechanism is not working.
^ Switch the machine off with the On/Off K button.
The metal contacts are dirty.
^ Clean the contacts and dry them thoroughly (see "Cleaning
and care - Drip tray").
If this fault message appears in the display again, contact
Miele.