Rinsing The Appliance; Water Container - Miele Built-in coffee machine Operating And Installation Instructions

Cleaning and care
,
Danger of burning!
Always allow the appliance to cool
down before cleaning. The water in
the drip tray can be very hot.
Switch off the appliance before
cleaning inside.
Do not clean the inside of the
capsule plate holder.
Do not use a steam cleaner to clean
this machine. Steam could reach the
electrical components and cause a
short circuit.
To avoid damaging the outer
surfaces of your appliance, do not
use:
– Cleaning agents containing soda,
ammonia, acids or chlorides
– Solvent-based cleaning agents
– Cleaning agents containing
descaling agents
– Stainless steel cleaners
– Dishwasher cleaner
– Oven cleaner
– Abrasive cleaning agents, e.g.
powder cleaners and cream cleaners
– Hard, abrasive sponges, e.g. pot
scourers, brushes or sponges which
have been previously used with
abrasive cleaning agents
– Dirt erasers
– Sharp metal scrapers
46

Rinsing the appliance

After a coffee has been dispensed, the
machine is rinsed before it switches off.
This removes any residual coffee
grounds.
The coffee pipework can also be rinsed
manually.
^ Touch y.
^ Use the arrow sensors to highlight
"Rinse appliance". Touch the OK
sensor.
The appliance will be rinsed.

Water container

Change the water every day to prevent
a build-up of bacteria.
^ The water container can be cleaned
in the dishwasher, or by hand using
warm water, a little washing-up liquid,
and a soft cloth. After cleaning, dry
the water container.
^ Clean and dry the surface the water
container sits on, particularly the
slots, carefully.
Make sure that the valve, the
underside of the water container
and the surface the water container
sits on are clean. Otherwise the
water container will not sit correctly.