Selecting A Timer; Days Of The Week Allocation - Miele Built-in coffee machine Operating And Installation Instructions

Selecting a timer

You can select:
– Timer 1:
Switch on at, Switch off at, Switch off
after
– Timer 2:
Switch on at, Switch off at
Switch on at
Please note that the coffee machine
will not switch on at the required time
if you have activated the system lock.
Use the arrow sensors to set the hours
and minutes.
If the coffee machine has switched
itself on three times via the "Switch on
at" timer function and no drinks have
been dispensed, the machine will not
switch itself on again automatically.
This prevents the coffee machine from
switching itself on unnecessarily, for
example whilst you are away on holi-
day.
The programmed times will, however,
remain in memory and will be
reactivated after manually switching the
machine on again.
Switch off at
Use the arrow sensors to set the hours
and minutes.
If the appliance has not been used for
quite some time, the times stored in
memory will be activated again the next
time the appliance is switched on
manually (see "Switch on at").
Switch off after
The "Switch off after" timer function is
only available via Timer 1.
If none of the sensors has been
pressed or no drink has been
prepared, the coffee machine will
switch itself off after 30 minutes to save
energy.
You can change this pre-setting using
the arrow sensors to a time of between
15 minutes and 9 hours.

Days of the week allocation

Select the required day of the week.
The selected day of the week will be
marked by 9.
When all required days of the week are
marked,
^ touch the X arrow sensor repeatedly
until "Accept" is highlighted.
Touch the OK sensor.
Settings
41