Changing The Portion Size; Changing The Portion Size During Drink Preparation - Miele Built-in coffee machine Operating And Installation Instructions

Changing the portion size

The flavour of the coffee produced
depends on the type of coffee, how
finely the beans are ground and the
quantity of water used.
The coffee machine allows you to
programme the amount of water
dispensed. This enables you to
programme the quantity of water
according to the size of your cups and
the type of coffee you are using.
The saved drink volume applies to
the type of drink (espresso, coffee,
long coffee) selected. It does not
differentiate according to the type of
coffee used or the carousel chamber.
Each type of drink has a maximum
portion size that can be programmed
into the machine. The coffee machine
halts preparation of the coffee once this
portion size has been reached. The
maximum possible portion size for this
type of drink is then saved in the
machine.
The changed portion size is always
saved in the current User profile. The
name of the current User profile
appears in the top-left of the display.
There are two ways of initiating the
programming of the portion size:
– By touching the drink sensor when
you are preparing a coffee; or
– By selecting "Portion size" in the
"Settings" menu.
32
If the water container becomes
empty during the preparation of a
drink, the programming of the portion
size will be cancelled. The portion
size will not be saved.
Changing the portion size
during drink preparation
If you touch and hold the ., / and y
sensors for at least 3 seconds, portion
size programming will begin.
^ Place the desired cup under the
central spout.
^ Touch and hold the sensor for the
desired drink until "Change" appears
in the display.
The drink will be prepared and "Save"
will appear in the display.
^ When the cup is filled up to the level
you want, touch the OK sensor.
From now on the saved portion size will
be dispensed for this drink.
Tip: You can cancel portion size
programming while "Stop" is visible in
the display.