Step 5: Connecting The Battery Temperature Sensor (Bts); Mounting Options; Figure 10 Bts With Cable - Xantrex RS2000 Installation Manual

Step 5: Connecting the Battery Temperature Sensor (BTS)

Mounting Options

975-0126-01-01
Installing a battery temperature sensor extends the life of a battery by preventing
overcharging in warm temperatures and undercharging in cold temperatures. With
a BTS monitoring the battery temperature, the voltage delivered to the battery is
adjusted according to battery's actual temperature.
The BTS has a self-adhesive backing and attaches to the side of the battery. A
25-foot (7.6 m) cable is supplied with the BTS, as shown in Figure 10.

Figure 10 BTS with Cable

WARNING: Energy and explosion hazard
Review the "Important Safety Instructions" on page v.
You can mount the battery temperature sensor (BTS) in one of two ways:
• Mounting the sensor to the negative battery post allows the internal battery
temperature to be sensed and provides the most accurate results.
• Attached the sensor to the side of battery using the self-adhesive backing also
provides good results in most situations.
Installation
29